Konica Minolta bizhub 282 - Manual (Page 160)

Basic copy operation 3
362/282/222 3-45
Ba
sic co
py ope
ra
tio
n
Chapter 3
Adjusting the Copy Density (Density settings)
0 The default setting is the middle of the five levels. When the “Auto” set-
ting is selected, the “Std.” Density setting is set.
0 The default Density setting and the density selected when the “Auto” set-
ting is selected can be changed from the Utility mode. For details, refer
to “Default Copy Output Levels” on page 11-14.
1
In the Basics screen,
touch [Quality/Density].
The Quality/Density
screen appears.
2
Select the desired Den-
sity setting.
– Each time [Light] or
[Dark] is touched, the
density is lightened
or darkened by one
level.
– Touch [Auto] to auto-
matically adjust the
density according to
the document that is
loaded.