Konica Minolta bizhub 282 - Manual (Page 170)

Basic copy operation 3
362/282/222 3-55
Ba
sic co
py ope
ra
tio
n
Chapter 3
1
In the Basics screen,
touch [Finishing].
The Finishing screen ap-
pears.
2
Touch [Group].
Stapling copies (staple settings)
!
Detail
In order for copies to be stapled, all of the following conditions must be
met.
- The paper width must be between 7-1/4 inch and 11-3/4 inch
- The paper length must be between 5-1/2 inch and 17 inch
- If the “Mixed Original” setting is selected, all copies must be printed
with paper of the same width.
If a staple setting is to be selected, select the orientation in which the
document is positioned. If an Original Direction setting is not selected,
the copies may not be stapled as desired.
For details on specifying the document orientation, refer to “Selecting the
document orientation (Original Direction settings)” on page 3-19.