Konica Minolta bizhub 282 - Manual (Page 189)

4 Additional copy operations
4-10 362/282/222
Addit
ion
al copy op
era
tions
Chapter 4
To recall a copy program
The registered copy programs can be recalled and used for copying.
1
Position the document to be copied. (Refer to page 3-8 for details.)
2
Press the [Mode Memo-
ry] key.
The Program screen ap-
pears.
3
Touch [Recall].
– To stop recalling a
copy program, press
the [Reset] key or the
[Mode Memory] key.
? Can the specified
settings for a copy
program be
checked?
% To check the pro-
gram copy settings
before recalling the copy program, refer to “Checking the copy set-
tings (Mode Check)” on page 4-2.
4
Touch the button for the program number registered with the desired
copy settings.
The program copy settings are recalled, and the Basics screen appears
again.
– If [Enter] is touched without touching a program number button, the
Basics screen appears again and no copy program is recalled.
5
Press the [Start] key.
Copying begins with the recalled copy settings.
Mode Memory