Konica Minolta bizhub 282 - Manual (Page 194)

Additional copy operations 4
362/282/222 4-15
Addit
ion
al copy op
era
tions
Chapter 4
!
Detail
To return to the Basics screen from the Accessibility Settings screen,
press the [Accessibility] key or the [Reset] key, or touch [Enter], [Set] or
[Reset].
If [Reset] in the Accessibility Settings screen is touched to return to the
Basics screen, the settings specified in the Accessibility Settings screen
are not applied, and the Basics screen is reset to its factory default set-
tings.
If [Set] or [Enter] in the Accessibility Settings screen is touched to return
to the Basics screen, the Basics screen is displayed with the settings
specified in the Accessibility Settings screen applied.
To set the “Screen Mode” function
Select whether the screens appear in the touch panel in black on white or in
white on black.
0 The factory default setting is “Normal Screen”.
1
Display the Accessibility Settings screen. (For details, refer to
page 4-14.)
2
Touch [Screen Mode].
The Screen Mode screen appears.
3
Select the setting for the
desired touch panel dis-
play.
– Touch [Inverted
Screen] to specify
that the screens ap-
pear in the touch
panel in white on
black.
– Touch [Normal
Screen] to return the
touch panel to its
original display.
4
Touch [Enter].
The Accessibility Settings screen appears again.