Konica Minolta bizhub 282 - Manual (Page 270)

Copy paper/original documents 7
362/282/222 7-19
C
o
p
y
pa
pe
r/
or
igin
a
l
d
o
cu
m
e
nts
Chapter 7
Documents that can be placed on the original glass
To copy documents that cannot be loaded into the ADF, position them on
the original glass.
Precautions for positioning documents on the original glass
Observe the following precautions when placing the document on the origi-
nal glass.
-
The size of documents printed on paper in metric sizes (such as A3, B4
and A4) cannot be automatically detected. The setting must be specified
by the technical representative. For details, contact the technical repre-
sentative.
- If a document of non-standard paper size is loaded, the “Auto Paper Se-
lect” and “Auto Zoom” settings cannot be used since the document size
cannot be detected automatically. If a document of non-standard paper
size is loaded, select the size of the paper to be copied.
- If highly translucent or transparent documents, such as overhead trans-
parencies or diazo photosensitive paper, are loaded, the document size
cannot be detected automatically. Place a blank sheet of paper of the
same size over the document.
- Do not place objects exceeding 4-1/2 lb on the original glass, otherwise
the original glass may be damaged.
- If a book is placed on the original glass, do not press it down extremely
hard, otherwise the original glass may be damaged.
Original glass documents
Document type Sheets, books (page spreads), three-dimensional objects
Document size 11 × 17 w or less
Maximum weight 4-1/2 lb