Konica Minolta bizhub 282 - Manual (Page 274)

Application functions 8
362/282/222 8-3
App
lica
tio
n f
unct
ions
Chapter 8
To copy using the “Cover Mode” function
0 The “Cover Mode” function can be used only if the ADF is installed.
1
Load the document into the ADF.
– For details on positioning the document, refer to “Feeding the doc-
ument” on page 3-8.
– If the document contains more than 80 pages, refer to “Scanning a
document in separate batches (“Separate Scan” setting)” on
page 3-12.
2
Load the paper for the cover pages and the paper for the main body of
the document into separate paper trays.
– Use paper with the same size for the cover pages and for the main
body of the document, and load them in the same orientation.
3
Touch [Application], and
then touch [Cover
Mode].
– For details on load-
ing paper when using
thick paper for the
cover pages, refer to
“Paper types and pa-
per capacities” on
page 7-4 and “Load-
ing paper into the by-
pass tray” on
page 2-60.
The Cover Mode screen appears.
4
Select the desired cover
page settings.
– To cancel the “Cover
Mode” function,
touch [OFF].