8 specifying account data settings, To display the desired account, Specifying account data settings -31 – Konica Minolta bizhub 282 User Manual
Page 372: To display the desired account -31
Utility mode
11
362/282/222
11-31
Utility mode
Ch
apt
er
11
11.8
Specifying account data settings
A password and the number of prints allowed can be specified and the
counters can be controlled for each account using this machine.
The following procedure describes how to display the desired account.
To display the desired account
0 [Account Track Setting] appear only if the “Account Track” parameter is
set to “ON”.
0 A maximum of 1,000 accounts can be registered on this machine.
1
Display the Administrator Management 1 screen, and then touch [Ac-
count/User Auth.].
–
For details on displaying the Administrator Management 1 screen,
refer to “Displaying the Administrator Management screen” on
page 11-21.
The Account/Authentication screen appears.
2
Touch [Account Track
Setting].
The Account Data
screen appears.
3
Touch the button for the
range of accounts that
includes the desired ac-
count.
–
To immediately dis-
play the desired ac-
count, touch
[Account #], and then
use the keypad to
type in the account
number.
The screen for the selected range of account numbers appears.