Konica Minolta bizhub 282 - Manual (Page 398)

Utility mode 11
362/282/222 11-57
Utility mode
Ch
apt
er
11
Specifying the setting
The shaded cells indicate the settings selected at the time of purchase.
!
Detail
The information for the LDAP server to be connected to must be regis-
tered in order to use the LDAP server. In addition, when LDAP and user
authentication is synchronized, select “Active Directory” as the user au-
thentication method. Select “GSS-SPNEGO” as the LDAP authentication
method. For details on the user authentication method, refer to “To reg-
ister a user with external server authentication” on page 11-40. For de-
tails on the LDAP authentication method, refer to the User’s Guide
[Network Scanner Operations].
Specifying whether to enable access locks and password rules, and
specifying the method for deleting image data (mode 469)
Specify whether to lock access if the password is entered incorrectly, specify
whether to apply the password rules, and specify the method for deleting im-
age data.
Settings at the time of purchase
Specifying the settings
The grayed out cells are the settings at the time of purchase.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description
7 Select whether or not
the user name/pass-
word used for exter-
nal server
authentication is used
to log on to the LDAP
server. 0 Not used for logon
1 Used for logon
6, 5, 4, 3, 2, 1, 0 ----------------------- 0000000 * Do not change these
bits when specifying
settings for this func-
tion.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)