Konica Minolta bizhub 282 - Manual (Page 75)

2 Before making copies
2-26 362/282/222
Be
fo
re
m
a
king
c
o
p
ie
s
Chapter 2
To turn off the machine
1
Press the [Power] (auxiliary power) key.
The touch panel goes off.
2
Set the main power
switch to [o].
2
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
Do not turn off the machine with the main power switch or the [Power]
(auxiliary power) key while it is making copies or printing, otherwise a pa-
per misfeed may occur.
Do not turn off the machine with the main power switch or the [Power]
(auxiliary power) key while it is scanning or sending or receiving data, oth-
erwise all scanned data or transmission data will be deleted.
Do not turn off the machine with the main power switch while a queued
job or stored data is waiting to be printed, otherwise the jobs will be de-
leted.
!
Detail
The following are cleared when the main power switch and [Power] (aux-
iliary power) key are turned off.
- Settings that have not been programmed
- Jobs queued to be printed