Adjusting needle bar height, Caution – Brother BES-962BC User Manual
Page 234
Advertising
Chapter 10 Adjustment
BES-962BC • BES-1262BC
232
Turn off the power switch and pull out the plug
before starting adjustment. Failure to do so may
start the machine unintentionally through an
accidental activation of the START switch, re-
sulting in bodily injuries.
• Adjustment
CAUTION
If adjustment should be made while the power
switch is turned on, pay special attention to your
safety.
Maintenance and inspection of the machine
should be conducted only by trained engineers.
1. Adjusting Needle Bar Height
q
u
e
y
t
r
10.8mm
y
t
u
i
i
q
w
Tighten the bolt
u
so that the
clearance can be
even.
Do not hit
this section.
180
°
Advertising