Brother BES-962BC - Manual (Page 252)

Chapter 11 Error code list
BES-962BC • BES-1262BC 250
Code
E-E9
E-EA
E-EB
E-EC
E-ED
E-EF
E-F1
E-F2
E-F3
E-F4
E-F5
E-F6
E-F7
E-F8
E-F9
E-FA
E-FB
E-FF
Error
Send/Receive inconsistent error during interfacing to
main PCB CPU
ACK code receiving error during interfacing to main
PCB CPU
Send/Receive ID code error during interfacing to
main PCB CPU
Send data checksum error during interfacing to main
PCB CPU
Data empty error during interfacing to main PCB
CPU
Receiving error on interface
Send time up error
Request-to-waiting time up error
Request-to-recive time up error
Receive command error
NACK code receiving error
Data requested for needle position can not be re-
turned.
It is not receive command for the request one.
PRE code error
No applicable command
Interface receive data sum check error
Send time up error
No status is returned from spindle, lower shaft motor,
or CPU.
Measures
This is not usually displayed.