Brother BES-962BC - Manual (Page 29)

Chapter 2 Preparation of Embroidery Machine
BES-962BC • BES-1262BC 27
Lift forks
The central seal
Embroidery machines should be installed only
by trained engineers.
Electric wiring should be laid by your distribu-
tor or electric experts.
The sewing machine weighs more than 720 kg.
The installation should be carried out by a lift
or a crane.
Do not connect the power source until installa-
tion is completed. Doing so may start the ma-
chine unintentionally through an accidental
activation of the START switch, resulting in
bodily injuries.
Install a machine in a place away from a high-
frequency welding machine or other machines
that may generate a strong electric noise. Fail-
ure to do so may cause the embroidery machine
to malfunction.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Secure the machine with the adjustment bolts
on the sound floor so that it will not move .
2. Installation
* After installation is completed, get the power supply from a dedicated outlet.
* When connecting multiple machines, exercise care not to exceed the capacity of the outlet.
2-1 Transportation of Machine
When relocating the machine, push the steel frame.
Note) Never push the cover or carriage.
When using a fork lift
DANGER
Viewing the machine from the back, position their center at the central seal, insert the forks
under the legs and lift the machine.