Replacing (attaching) rotary hook – Brother BES-962BC User Manual
Page 238
Advertising
Chapter 10 Adjustment
BES-962BC • BES-1262BC
236
q
Lower
shaft
2. Replacing (Attaching) Rotary Hook
1.
Turn the power switch off.
2.
Tighten the screw
q
of the rotary hook
cutting section to fit to that of the lower
shaft
w
.
3.
When mounting, press it inward until it
stops.
Note) After replacing rotary hooks, refer to "4. Ad-
justment of Timing Between Needle and Ro-
tary Hook (Page 238)" and adjust the timing.
Cutting
section
Advertising