Lukas P 650 Series - Manual (Page 23)

23
NOTE:
All shift levers must always be moved all the way to their end position.
8.4.2 "4POWER mode" control valve
Six levers are located on the connecting block of this valve.
There are also two large levers that control the "TURBO"
function. Shifting the lever to the relevant position allows you
to supply double the quantity of hydraulic
À uid to one of the
two connections either side of the lever.
In order to activate the "TURBO" function, both connections
must be pressurised. The "TURBO" function is activated by
turning the large lever towards the connection that requires
double the
À uid quantity.
Each of the four small levers is assigned to a pressure port. Actuating
the respective lever regulates the pressure in the corresponding pressure
hose (" ") or depressurises the connection (" ").
NOTE:
All shift levers must always be moved all the way to their end position.