Lukas P 650 Series - Manual (Page 53)

53
13. Technical data
NOTE:
The following tables contain only the technical data required for standard
acceptance.
Additional data concerning your unit can be obtained from LUKAS on request.
The restriction for the maximum
¿ ll quantity of the hydraulic reservoir is calculated
from the "operability in inclined position" speci
¿ cations in the relevant standards.
Because all values are subject to tolerances, there may be small differences between the
data for your device and the data in the following tables!
The values may also differ because of reading inaccuracies and/or tolerances in the
measuring equipment used.
13.1 Power unit
13.1.1 Basic unit dimensions
Units without hose reel:
Units with hose reel:
485 [19.1]
mm [inch]
445 [17.5]
440 [17.3]
627 [24.7]
795 [31.3]
810 [31.9]
440 [17.3]
445 [17.5]