Lukas P 650 Series - Manual (Page 7)

7
In the event of malfunctions,
immediately shut down the
equipment and secure it.
The malfunction is to be
repaired immediately. Do not carry out any changes
(additions or conversions)
to the equipment without
obtaining prior approval from
LUKAS.
Observe all safety and danger
notes on the device and in the
operating instructions. All safety and danger notes
on the device are to be kept
complete and in a legible
condition.
Please ensure that all safety
covers are present on the
equipment and that they
are in proper and adequate
condition. Any mode of operation which
impairs safety and/or stability
of the device is forbidden!
Safety devices must never be
deactivated! The maximum operating
pressure set on the equipment
must not be changed!
Before the device is switched
on/started up, and during its
operation, it must be ensured
that nobody is endangered by
the operation of the device. Comply with all speci
¿ ed
dates or dates speci
¿ ed in
the operating instructions
pertaining to regular checks /
inspections of the equipment.
When working in the proximity
of live components and
wires, appropriate steps must
be taken to avoid current
transmission or high-voltage
discharge through the device. Only genuine LUKAS
accessories and spare parts
are to be used for repairs.
When working with this
equipment or when
transporting it, ensure that you
do not get caught up in the
hose or cable loops and trip.
The build-up of static charge
with the potential consequence
of spark formation is to be
avoided when handling the
device. When working with
combustion engine pumps,
never touch the motor and
exhaust system, since there is
a risk of burning.
Motor pumps may not be used
in explosion hazard areas! Combustion engines must
not be used in enclosed
spaces, as there is a danger of
poisoning and/or asphyxiation!
If fuel for combustion engines
is spilled, this fuel must be
removed completely before
starting the motor. Filling up during operation
of the combustion engine is
strictly prohibited!