Lukas P 650 Series - Manual (Page 42)

42
11.3.4 Externally charging and replacing the starter battery
Procedure:
1. Remove the left side panel "A" on the hydraulic unit by detaching the mounting clips "B".
2. Starter battery "C" is now visible. First disconnect the negative ("-") and then the positive
terminal ("+") on the battery.
3. If you would like to charge the starter battery
using an external charger, connect the
device now. (Read the instruction manual
accompanying the charger)
If the battery is defective, it must be replaced.
Loosen attachment belt "D" and remove the
battery. When replacing the battery, make sure
that you insert the new battery as shown in the
illustration.
The unit is assembled in reverse order.
B
A
C D