Lukas P 650 Series - Manual (Page 26)

26
Always fully extend and secure the carrying handles before using them to transport the unit.
When not in use, always insert and secure the carrying handles to prevent them from
restricting your movement when operating the unit. The handles should also be inserted and
secured when stored to reduce the risk of accident.
Procedure (fi tting the telescopic carrying handles to units without a reel):
1. Remove protective covers "A" using a screwdriver.
2. Insert telescopic carrying handle "B" in the frame and screw in guide sleeve "C".
3. Then slide the telescopic carrying handle all the way in and lock in position.
A
B
C
8.6 Telescopic carrying handles
Units with a hose reel are
¿ tted with carrying handles. Units without a hose reel can be
retro
¿ tted with handles if required. The handles should be used to transport the P650.
The telescopic carrying handles are screwed directly to the frame. The blanking plugs must
be removed before the handles can be attached.
Turn the handles clockwise (approx. 1 revolution) in the end positions (retracted or extended
completely) to secure them properly. Turn the handles anticlockwise (approx. 1 revolution)
to unlock them.