Hydraulic oil, Major component weights, 2 function speeds – JLG 18RS Service Manual User Manual

Page 14: Hydraulic oil -2 major component weights -2, Function speeds -2, Hydraulic oil -2, Critical stability weights -2

Advertising
background image

SECTION 1 - SPECIFICATIONS

1-2

– JLG Lift –

3121284

Hydraulic Oil

NOTE: Hydraulic oils require anti-wear qualities at least API

Service Classification GL-3, and sufficient chemical
stability for mobile hydraulic system service.

NOTE: Machines may be equipped with Mobil EAL biode-

gradable and non-toxic hydraulic oil. This is a fully
synthetic hydraulic oil that possesses the same anti-
wear and rust protection characteristics as mineral
oils, but will not adversely affect the ground water or
the environment when spilled or leaked in small
amounts.

NOTE: Aside from JLG recommendations, it is not advis-

able to mix oils of different brands or types, as they
may not contain the same required additives or be
of comparable viscosities. If use of hydraulic oil
other than Mobil 424 is desired, contact JLG Indus-
tries for proper recommendations.

Major Component Weights

DO NOT REPLACE ITEMS CRITICAL TO STABILITY WITH ITEMS
OF DIFFERENT WEIGHT OR SPECIFICATION (FOR EXAMPLE: BAT-
TERIES, FILLED TIRES, PLATFORM) DO NOT MODIFY UNIT IN
ANY WAY TO AFFECT STABILITY.

1.2 FUNCTION SPEEDS

Notes:

1.

Personality settings can be adjusted anywhere within
the adjustment range in order to achieve optimum
machine performance.

2.

Stop watch should be started with the function move-
ment, not with actuation of the joystick or switch.

3.

All speed tests are run from the platform, except those
specifically designated to be run in Ground Mode.

4.

The platform speed control knob must be at full speed
(turned clockwise completely) unless noted.

5.

Functional speeds may vary due to cold thick hydraulic
oil. Test should be run with the oil temperature above
38° C (100° F)

6.

Drive test results reflect 315 / 55 D20 Foam Filled Tires

Table 1-6. Hydraulic Oil

Hydraulic System

Operating

Temperature Range

S.A.E. Viscosity

Grade

+0° to + 180° F

(-18° to +83° C)

10W

+0° to + 210° F

(-18° to +99° C)

10W-20, 10W30

+50° to + 210° F

(+10° to +99° C

20W-20

Table 1-7. Critical Stability Weights

Components

LBS.

KG.

Tire & Wheel (Foam-Filled)

343

155.5

Engine Assembly (w/tray)

917

416

Battery

41

18.5

Counterweights (Left or Right)

937

425

Tower Boom

441.5

200.3

Tower Link

304.6

138.2

Upright

410.3

186.1

Main Boom Assembly

1886.5

855.7

Platform

224

102

Platform Support

68

31

Platform Rotator

55

25

Advertising