JLG 18RS Service Manual - Manual (Page 93)

SECTION 5 - HYDRAULICS
3121284 – JLG Lift – 5-3
5.2 HYDRAULIC CYLINDERS
Platform Slave Level Cylinder
DISASSEMBLY
1. Remove the lockwire.
2. Remove the cylinder rod (with piston, head, and lock-
nut) from the barrel.
3. Unscrew the locknut from rod.
4. Remove the piston and head from the rod.
5. Remove the seals on the components.
ASSEMBLY
1. Install seals on the components.
2. Install the head and piston onto the rod.
3. Screw the locknut onto the rod.
4. Install the rod into the barrel.
5. Install the lockwire to retain the head.
Figure 5-1. Slave Level Head Assembly
Figure 5-2. Slave Level Head Assembly