JLG 600SC_660SJC Service Manual User Manual
Page 142
Advertising
SECTION 5 - CAT CHASSIS (S/N 0300128000 TO PRESENT)
5-50
– JLG Lift –
3121157
10.
Assemble sun gear B (1-15) mounted with snap ring
(1-16).
11.
Assemble holder (1-17) mounted with inner race (1-
20) and spring pin (1-21).
12.
Assemble needle bearing (1-19) and planetary gear
A (1-18) in this order, and then assemble drive gear
(1-22).
13.
Assemble thrust plate (1-23).
NOTE: Note: Before installation, select a thrust plate so that
A dimension will be 0.3 to 0.8 mm.
14.
Apply liquid gasket (ThreeBond 11041) evenly to the
circumference of contact surface of cover (1-27) and
housing (1-6), and assemble cover so that bolt holes
will align.
Advertising