10 foot switch adjustment, Foot switch adjustment -33, Platform support torque values -33 – JLG 600SC_660SJC Service Manual User Manual
Page 259
Advertising
SECTION 7 - BOOM & PLATFORM
3121157
– JLG Lift –
7-33
7.10 FOOT SWITCH ADJUSTMENT
Adjust so that functions will operate when pedal is at cen-
ter of travel. If switch operates within last 1/4 in. (6.35 mm)
of travel, top or bottom, it should be adjusted.
A,B,D
C,D
E
A
B
C
D
E
Torque to 50 ft.lbs. (68 Nm)
Loctite #242
Torque to 480 ft. lbs. (650 Nm)
Check torque every 150 hours of operation
Torque to 85 ft. lbs. (115 Nm)
Figure 7-30. Platform Support Torque Values
NOTE: If any rotator bolts are replaced, all bolts
on the rotator should be retorqued.
Advertising