JLG 600SC_660SJC Service Manual - Manual (Page 369)

SECTION 10 - BASIC ELECTRICAL INFORMATION & SCHEMATICS
3121157 – JLG Lift – 10-5
AMP Mate-N-Lok
Follow the installation instructions.
DIN Connectors
This connector is typically used on hydraulic valves. Fol-
low the installation instructions.
Exclusions
A limited number of connectors do not benefit from dielec-
tric grease, or may be permanently damaged by applica-
tion. Dielectric grease may not be required in properly
sealed enclosures.
Figure 10-6. Use of Seal Plugs