Amp connector -8, Connector assembly figure 2 -8 – JLG 600SC_660SJC Service Manual User Manual
Page 372
Advertising
SECTION 10 - BASIC ELECTRICAL INFORMATION & SCHEMATICS
10-8
– JLG Lift –
3121157
2.
Pull back on the contact wire with a force of 1 or 2
lbs. to be sure the retention fingers are holding the
contact (See Figure 10-9.).
3.
After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Figure 10-8. AMP Connector
Figure 10-9. Connector Assembly Figure 2
Advertising