JLG 600SC_660SJC Service Manual - Manual (Page 88)

SECTION 4 - CAT CHASSIS (PRIOR TO S/N 0300128000)
4-26 – JLG Lift – 3121157
6. Disconnect hose assemblies (2). Remove fitting (3).
7. Attach a suitable lifting device to final drive and
travel motor (4). The weight of final drive and travel
motor (4) is approximately 209 kg (460 lb).
8. Remove bolts (5). Remove final drive and travel
motor (4).
Installation
1. Attach a suitable lifting device to final drive and
travel motor (4). The weight of final drive and travel
motor (4) is approximately 209 kg (460 lb).
2. Position final drive and travel motor (4) and install
bolts (5). Tighten bolts (5) to a torque of 175±40Nm
(130±30lbft).
Table 4-16. Final Drive Required Tools - Installation
Required Tools
Tool Part Number Part Description Qty.
A FT-2674 Vacuum Cap 1