Outrigger cylinder removal - (sheet 2 of 2) -12 – JLG 67SL Service Manual User Manual
Page 44
SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3-12
– JLG Lift –
3121322
Installation:
1.
Carefully insert Outrigger Cylinder (16) back into the
frame and secure with the four Bolts (14) and Lock-
washers (15).
2.
Replace Gasket (13) and Plate (12). Secure with four
Bolts (10) and Lockwashers (11).
NOTE: At this point the frame may be lowered.
3.
Place Valve Assembly (7), Limit Switch Bracket (8),
and Limit Switch (9) back onto the top of the cylinder
and secure with the four Bolts (5) and Lockwashers
(6).
4.
Reconnect all hydraulic lines and electrical wires.
5.
Return flow of hydraulic oil and ensure there is no
leakage. Operate cylinder to ensure it works prop-
erly.
6.
Replace Cover (1) and secure with four Bolts (2) and
Lockwashers (3).
C
D
10 11
12 13
14
15
16
16
Figure 3-9. Outrigger Cylinder Removal - (Sheet 2 of 2)
10.
Bolt, M6 x 16mm
11.
Lockwasher, M6
12.
Plate
13.
Gasket
14.
Bolt, M12 x 70mm
15.
Lockwasher, M12
16.
Outrigger Cylinder