Engine tray slide, Engine tray slide -15 – JLG 67SL Service Manual User Manual
Page 47
Advertising
SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121322
– JLG Lift –
3-15
Engine Tray Slide
The engine tray can be slide outward approximately 5.9
in. (15 cm) when servicing components inside the engine
compartment.
1.
Remove the two Bolts (1) and Lockwashers (2) on
the front of the engine tray.
2.
Loosen the two top Bolts (3) at both ends of the
engine compartment. Slide engine tray outward.
3.
Be sure to return engine tray to stowed position
when finished servicing. Secure engine tray with the
two front Bolts (1) and Lockwashers (2) and two top
Bolts (3).
1, 2
3
1, 2
3
Figure 3-12. Engine Tray Slide
1.
Bolt, M16 x 30mm
2.
Lockwasher, M16
3.
Bolt, M16 x 60mm
Advertising