Scissor arm assembly removal, Scissor arm assembly removal -39 – JLG 67SL Service Manual User Manual
Page 71
SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121322
– JLG Lift –
3-39
Scissor Arm Assembly Removal
EXTREME CAUTION MUST BE USED WHILE REMOVING ANY
LARGE COMPONENTS. THESE COMPONENTS ARE EXTREMELY
HEAVY AND CAN CAUSE SERIOUS INJURY OR DEATH IF NOT
REMOVED CAUTIOUSLY.
NOTE: It is recommended to remove the scissor arm
assembly as a whole unit.
1.
Disconnect all hoses and wires connecting the scis-
sor assembly to the chassis and platform.
2.
Remove platform from the scissor arm stack. (see
Figure 3-32. and Figure 3-33.)
3.
Secure scissor arm assembly with two lifting straps
attached to an overhead lifting device.
NOTE: Scissor arm assembly weighs approximately 11,243
lbs (5100 kg). Straps and lifting device must be
capable of lifting the scissor assembly.
STRAP
STRAP