JLG 67SL Service Manual - Manual (Page 67)

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121322 – JLG Lift – 3-35
Platform Removal:
NOTE: Procedures apply to both left and right sides.
1. Support the platform along the sides with the fork-
truck forks or use suitable straps or chains at the
four corners of the platform.
2. Remove the fourteen Capscrews (2) and Flatwash-
ers (3) attaching both Platform Retaining Brackets
(1) to the Platform.
3. Lift the platform from the armstack.
1
2, 3
2, 3
2, 3
2, 3
2, 3
2, 3
2, 3
1. Platform Retaining Bracket
2. Capscrew, M10 x 20mm
3. Flatwasher, M10
Figure 3-33. Platform Removal - 2 of 2 (Rear of Platform)
NOTE: Illustration shows scissor arm assembly connection point to underside of
platform at the rear of the platform.