JLG 67SL Service Manual - Manual (Page 52)

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3-20 – JLG Lift – 3121322
Air Filter Assembly
NOTE: Refer to Figure 3-18. when dismantling the Air Filter
for service and/or replacements.
1. Removing the pipes and tubes requires loosening
the hose clamps. Once the hose clamps are loos-
ened, the tubes and pipes can be removed for main-
tenance or replacement.
2. To remove the Air Filter (1), unscrew the 2 Bolts (2).
Remove the air cleaner from the bracket.
3. Lift the latches on the end of the Air Filter to access
the safety element (not shown).
NOTE: When assembling the air filter system, take care to
securely fit all tubing and piping together and to
securely tighten all hose clamps.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Figure 3-18. Air Filter Assembly
1. Air Filter
2. Bolt, Nut, Flatwasher
3. Intake Hose
4. Hose Clamp
5. Hose Clamp
6. Hose Clamp
7. Reducing Sleeve
8. Hose Clamp
9. Air Intake Elbow
10. Hose Clamp
11. Air Intake Tube
12. Hose Clamp
13. Air Intake Elbow
14. Air Intake Tube
15. Hose Clamp
16. Intake Pipe
17. Hose Clamp
18. Rubber Intake Tube
19. Hose Clamp