JLG SSV10 Operator Manual - Manual (Page 27)

SECTION 2 - PREPARATION AND INSPECTION
3121186 – JLG Lift – 2-9
the Ground Control Module and Platform Con-
sole.
• Platform Joystick and Footswitch Enable -
The machine will not operate (drive or lift) unless
both of these switches are pressed and held
during drive or lift operation.
d. Ensure all machine functions are disabled when the
Emergency Stop Button is activated (pressed in).
3. With platform in the transport (stowed) position:
a. Drive the machine on a grade, not to exceed the
rated gradability, and stop to ensure the brakes
hold.
SECTION 2 - PREPARATION AND INSPECTION
3121186 – JLG Lift – 2-9
the Ground Control Module and Platform Con-
sole.
• Platform Joystick and Footswitch Enable -
The machine will not operate (drive or lift) unless
both of these switches are pressed and held
during drive or lift operation.
d. Ensure all machine functions are disabled when the
Emergency Stop Button is activated (pressed in).
3. With platform in the transport (stowed) position:
a. Drive the machine on a grade, not to exceed the
rated gradability, and stop to ensure the brakes
hold.