5 hood - (original) – JLG SSV10 Operator Manual User Manual
Page 36
SECTION 3 - MACHINE OPERATION
3-8
– JLG Lift –
3121186
3.5 HOOD - (ORIGINAL)
To Remove the Front Hood:
1. Loosen the three (3) hood latch screws.
2. Use the latch handle or a screw driver in the slot on each
screw and turn it counterclockwise 1/4 turn while pulling it
out slightly to release it from the clip lock under the hood.
3. Lift hood completely off the machine.
Figure 3-3. Front Hood Removal.
4. Hood
5. Hood Latch Screws
SECTION 3 - MACHINE OPERATION
3-8
– JLG Lift –
3121186
3.5 HOOD - (ORIGINAL)
To Remove the Front Hood:
1. Loosen the three (3) hood latch screws.
2. Use the latch handle or a screw driver in the slot on each
screw and turn it counterclockwise 1/4 turn while pulling it
out slightly to release it from the clip lock under the hood.
3. Lift hood completely off the machine.
Figure 3-3. Front Hood Removal.
4. Hood
5. Hood Latch Screws