14 ground control station - programming – JLG SSV10 Operator Manual User Manual

Page 60

Advertising

SECTION 3 - MACHINE OPERATION

3-32

– JLG Lift –

3121186

3.14 GROUND CONTROL STATION -

PROGRAMMING

General

The Ground Control Station on the SSV10 machine allows on-
board programming of various component and control function
personality settings.

Programming may be required under circumstances such as:

• The Ground Control Station module has been replaced and

optional equipment on the machine needs to be enabled.

• Optional equipment has been added to the machine in the

field and a function must be enabled before operation.

• Customizing the machine to fit a specific application, such as

changing the LCD display language.

Programming Levels

There is one (1) password protected programming level available
to the Operator:

• Level-3: Operator’s Settings - Level-3 Password: 33271

Operator Programming Mode

In the Operator Level Programming Mode the following items are
shown on the main menu:

• Tilt Sensor

• Program

Tilt Sensor

Allows viewing current tilt sensor - individual X and Y direction
degree reading.