JLG SSV10 Operator Manual - Manual (Page 73)

SECTION 3 - MACHINE OPERATION
3121186 – JLG Lift – 3-45
9. Remove the rug from the Rug Carrier Accessory. If required,
use an assistant to unload the rug from the Rug Carrier
Accessory Arms.
10. Replace the Rug Hanger Accessory arms to the stowed posi-
tion for normal operation.
THE RUG CARRIER ACCESSORY ARMS MUST BE LOCKED IN THE
STOWED POSITION WHEN NOT IN USE.
EXTREME CAUTION MUST BE EXERCISED AT ALL TIMES WHILE THE
RUG CARRIER ACCESSORY IS IN USE (DRIVING, RAISING AND LOW-
ERING) TO PREVENT OBSTACLES AND PERSONNEL FROM STRIKING
THE LOAD.
WHEN DRIVING WITH A RUG WITHIN THE RUG CARRIER ACCESSORY,
THE RUG MUST BE PROPERLY SECURED TO PREVENT INADVERTENT
MOTION OR MOVEMENT OF THE RUG AND MUST NOT EXCEED THE
RATED CAPACITY OF THE RUG CARRIER ACCESSORY.
NEVER OVERLOAD THE RUG CARRIER ACCESSORY. MAXIMUM
CAPACITY OF THE RUG CARRIER ACCESSORY IS 50 LBS.
THE COMBINED WEIGHT OF PERSONNEL, MATERIALS, EQUIPMENT
PLUS ANY LOAD ON THE RUG CARRIER ACCESSORY MUST NOT
EXCEED THE MAXIMUM CAPACITY OF THE PLATFORM.
NEVER USE A RUG CARRIER ACCESSORY THAT HAS DAMAGE OR
LOOSE MOUNTINGS. IMMEDIATELY REPORT ANY DAMAGE TO
APPROPRIATE PERSONNEL. DISCONTINUE USE OF THE RUG CAR-
RIER ACCESSORY UNTIL ALL DISCREPANCIES HAVE BEEN COR-
RECTED.
Removing Rug From Display Arm.
1. Roll Rug onto Rug Carrier while Elevating Platform
2. Rug Carrier in Carry Position
1
2
SECTION 3 - MACHINE OPERATION
3121186 – JLG Lift – 3-45
9. Remove the rug from the Rug Carrier Accessory. If required,
use an assistant to unload the rug from the Rug Carrier
Accessory Arms.
10. Replace the Rug Hanger Accessory arms to the stowed posi-
tion for normal operation.
THE RUG CARRIER ACCESSORY ARMS MUST BE LOCKED IN THE
STOWED POSITION WHEN NOT IN USE.
EXTREME CAUTION MUST BE EXERCISED AT ALL TIMES WHILE THE
RUG CARRIER ACCESSORY IS IN USE (DRIVING, RAISING AND LOW-
ERING) TO PREVENT OBSTACLES AND PERSONNEL FROM STRIKING
THE LOAD.
WHEN DRIVING WITH A RUG WITHIN THE RUG CARRIER ACCESSORY,
THE RUG MUST BE PROPERLY SECURED TO PREVENT INADVERTENT
MOTION OR MOVEMENT OF THE RUG AND MUST NOT EXCEED THE
RATED CAPACITY OF THE RUG CARRIER ACCESSORY.
NEVER OVERLOAD THE RUG CARRIER ACCESSORY. MAXIMUM
CAPACITY OF THE RUG CARRIER ACCESSORY IS 50 LBS.
THE COMBINED WEIGHT OF PERSONNEL, MATERIALS, EQUIPMENT
PLUS ANY LOAD ON THE RUG CARRIER ACCESSORY MUST NOT
EXCEED THE MAXIMUM CAPACITY OF THE PLATFORM.
NEVER USE A RUG CARRIER ACCESSORY THAT HAS DAMAGE OR
LOOSE MOUNTINGS. IMMEDIATELY REPORT ANY DAMAGE TO
APPROPRIATE PERSONNEL. DISCONTINUE USE OF THE RUG CAR-
RIER ACCESSORY UNTIL ALL DISCREPANCIES HAVE BEEN COR-
RECTED.
Removing Rug From Display Arm.
1. Roll Rug onto Rug Carrier while Elevating Platform
2. Rug Carrier in Carry Position
1
2