18 rug carrier accessory - (option) – JLG SSV10 Operator Manual User Manual

Page 70

Advertising
background image

SECTION 3 - MACHINE OPERATION

3-42

– JLG Lift –

3121186

3.18 RUG CARRIER ACCESSORY - (OPTION)

NOTE:

This rug carrier accessory is intended for use in placing
or retrieving rolled/unrolled rugs and other similar stock
stored on racks or shelves above ground level. Use for
any other purpose is not authorized by JLG.

The rug carrier accessory consists of two extendable arms
mounted on the left side of the the SSV10 machine. The maximum
combined load carrying capacity for both arms is 50 lb. (23kg).

The carrier arms can be retracted out of the way parallel with the
side of the machine when not in use, (the stowed position).

Pre-Start Inspection

Prior to use of the carrier accessory, check the following;

• The platform material tray is fully raised and locked in posi-

tion.

• Carrier arm mounts are secure to the machine, no missing or

damaged fasteners.

• The carrier arms lock pins are in place and secure.

THE COMBINED WEIGHT OF PERSONNEL, MATERIALS, EQUIPMENT
PLUS ANY LOAD ON THE RUG CARRIER ACCESSORY MUST NOT
EXCEED THE MAXIMUM LOAD CAPACITY OF THE PLATFORM.

1. Rug Carrier arms shown in the extended or carry position.

NOTE: Maximum combined carrying capacity for both arms is 50 lb.

(23kg)

1

SECTION 3 - MACHINE OPERATION

3-42

– JLG Lift –

3121186

3.18 RUG CARRIER ACCESSORY - (OPTION)

NOTE:

This rug carrier accessory is intended for use in placing
or retrieving rolled/unrolled rugs and other similar stock
stored on racks or shelves above ground level. Use for
any other purpose is not authorized by JLG.

The rug carrier accessory consists of two extendable arms
mounted on the left side of the the SSV10 machine. The maximum
combined load carrying capacity for both arms is 50 lb. (23kg).

The carrier arms can be retracted out of the way parallel with the
side of the machine when not in use, (the stowed position).

Pre-Start Inspection

Prior to use of the carrier accessory, check the following;

• The platform material tray is fully raised and locked in posi-

tion.

• Carrier arm mounts are secure to the machine, no missing or

damaged fasteners.

• The carrier arms lock pins are in place and secure.

THE COMBINED WEIGHT OF PERSONNEL, MATERIALS, EQUIPMENT
PLUS ANY LOAD ON THE RUG CARRIER ACCESSORY MUST NOT
EXCEED THE MAXIMUM LOAD CAPACITY OF THE PLATFORM.

1. Rug Carrier arms shown in the extended or carry position.

NOTE: Maximum combined carrying capacity for both arms is 50 lb.

(23kg)

1

Advertising