JLG SSV10 Operator Manual - Manual (Page 56)

SECTION 3 - MACHINE OPERATION
3-28 – JLG Lift – 3121186
Drive Speed Setting Controls
NOTE: When the platform is elevated the maximum drive speed
is automatically cut-back to 1/4th the speed when the
platform is fully lowered. The Ground Control Module-
LCD screen will display a turtle when in this mode, See
page 3-13 - Machine LCD Status Display in this section of
the manual.
Drive Speed Setting
Selector Switch
1. Selector Switch (on
top of joystick)
Each PRESS on this side of
the switch will DECREASE
maximum drive speed.
(LESS LEDs Lit up on the
Drive Speed Indicator.)
Each PRESS on this side
of the switch will
INCREASE maximum
drive speed.
(MORE LEDs Lit up on the
Drive Speed Indicator.)
1
SECTION 3 - MACHINE OPERATION
3-28 – JLG Lift – 3121186
Drive Speed Setting Controls
NOTE: When the platform is elevated the maximum drive speed
is automatically cut-back to 1/4th the speed when the
platform is fully lowered. The Ground Control Module-
LCD screen will display a turtle when in this mode, See
page 3-13 - Machine LCD Status Display in this section of
the manual.
Drive Speed Setting
Selector Switch
1. Selector Switch (on
top of joystick)
Each PRESS on this side of
the switch will DECREASE
maximum drive speed.
(LESS LEDs Lit up on the
Drive Speed Indicator.)
Each PRESS on this side
of the switch will
INCREASE maximum
drive speed.
(MORE LEDs Lit up on the
Drive Speed Indicator.)
1