JLG SSV10 Operator Manual - Manual (Page 68)

SECTION 3 - MACHINE OPERATION
3-40 – JLG Lift – 3121186
3.16 OPTIONAL PLATFORM ACCESSORIES
THE WEIGHT OF OBJECTS CARRIED IN A PLATFORM ACCESSORY,
ALONG WITH PERSONNEL AND EQUIPMENT PLACED IN THE PLAT-
FORM MUST NOT EXCEED THE MAXIMUM RATED PLATFORM CAPAC-
ITY.
DO NOT USE MORE THAN ONE ACCESSORY MOUNTED ON THE SAME
SIDE OF THE PLATFORM AT ANY TIME.
3.17 PLATFORM HANGER ACCESSORY -
(OPTION)
NOTE: This hanger accessory is intended for use in placing or
retrieving lightweight bulky stock items such as bicycles,
ladders, etc., on racks or shelves above ground level.
Use for any other purpose is not authorized by JLG.
The hanger accessory is a pivoting arm mounted to the SSV10
platform rail. The hanger accessory can be mounted to either side
of the platform individually, or two can be mounted, one on each
side of the platform. Each individual hanger has a maximum load
capacity of 50 lb. (23 kg).
The hanger arm can be pivoted out of the way parallel with the
platform side rails when not in use, (the stowed position). The
hanger arm is pinned into position at 90 degrees to the platform
side rails when in use, (the carry position).
Pre-Start Inspection
Prior to use of the hanger accessory, check the following;
• Hanger arm mounting is secure to the platform railing, no
missing or damaged fasteners.
• The hanger arm lock pin is in place and secure.
SECTION 3 - MACHINE OPERATION
3-40 – JLG Lift – 3121186
3.16 OPTIONAL PLATFORM ACCESSORIES
THE WEIGHT OF OBJECTS CARRIED IN A PLATFORM ACCESSORY,
ALONG WITH PERSONNEL AND EQUIPMENT PLACED IN THE PLAT-
FORM MUST NOT EXCEED THE MAXIMUM RATED PLATFORM CAPAC-
ITY.
DO NOT USE MORE THAN ONE ACCESSORY MOUNTED ON THE SAME
SIDE OF THE PLATFORM AT ANY TIME.
3.17 PLATFORM HANGER ACCESSORY -
(OPTION)
NOTE: This hanger accessory is intended for use in placing or
retrieving lightweight bulky stock items such as bicycles,
ladders, etc., on racks or shelves above ground level.
Use for any other purpose is not authorized by JLG.
The hanger accessory is a pivoting arm mounted to the SSV10
platform rail. The hanger accessory can be mounted to either side
of the platform individually, or two can be mounted, one on each
side of the platform. Each individual hanger has a maximum load
capacity of 50 lb. (23 kg).
The hanger arm can be pivoted out of the way parallel with the
platform side rails when not in use, (the stowed position). The
hanger arm is pinned into position at 90 degrees to the platform
side rails when in use, (the carry position).
Pre-Start Inspection
Prior to use of the hanger accessory, check the following;
• Hanger arm mounting is secure to the platform railing, no
missing or damaged fasteners.
• The hanger arm lock pin is in place and secure.