JLG SSV10 Operator Manual User Manual

Page 54

Advertising
background image

SECTION 3 - MACHINE OPERATION

3-26

– JLG Lift –

3121186

Multifunction Joystick Control

The joystick will operate the following machine functions:

• Drive

• Lift Up and Down

NOTE:

Use the Drive/Lift Mode Selector Switch to select which
function the joystick will operate.

The selected operating mode will only remain active for 5
seconds if the function is not operated.

Remember to press and hold both the joystick function
enable lever and platform function enable foot switch
simultaneously in order to operate any joystick functions.

WHEN DRIVING WITH PLATFORM LOWERED, DO NOT ATTEMPT TO
DRIVE MACHINE UP A RAMP (GRADE) OF GREATER THAN FIFTEEN
PER CENT (15%).

DRIVING WITH PLATFORM ELEVATED IS RESTRICTED TO A SMOOTH,
FIRM AND LEVEL SURFACE WITHIN 1.5 DEGREES OF LEVEL IN ANY
DIRECTION.

Drive Mode

1. Activate the Drive Mode

using the Drive/Lift
Mode Selector switch.

Within 5 seconds of
activation - Simulta-
neously ENGAGE and
HOLD both the JOY-
STICK ENABLE LEVER
and the FOOTSWITCH
ENABLE then move the
joystick in the desired
direction of travel. Drive
power is applied pro-
portionally the further
the joystick is moved off
center.

1

SECTION 3 - MACHINE OPERATION

3-26

– JLG Lift –

3121186

Multifunction Joystick Control

The joystick will operate the following machine functions:

• Drive

• Lift Up and Down

NOTE:

Use the Drive/Lift Mode Selector Switch to select which
function the joystick will operate.

The selected operating mode will only remain active for 5
seconds if the function is not operated.

Remember to press and hold both the joystick function
enable lever and platform function enable foot switch
simultaneously in order to operate any joystick functions.

WHEN DRIVING WITH PLATFORM LOWERED, DO NOT ATTEMPT TO
DRIVE MACHINE UP A RAMP (GRADE) OF GREATER THAN FIFTEEN
PER CENT (15%).

DRIVING WITH PLATFORM ELEVATED IS RESTRICTED TO A SMOOTH,
FIRM AND LEVEL SURFACE WITHIN 1.5 DEGREES OF LEVEL IN ANY
DIRECTION.

Drive Mode

1. Activate the Drive Mode

using the Drive/Lift
Mode Selector switch.

Within 5 seconds of
activation - Simulta-
neously ENGAGE and
HOLD both the JOY-
STICK ENABLE LEVER
and the FOOTSWITCH
ENABLE then move the
joystick in the desired
direction of travel. Drive
power is applied pro-
portionally the further
the joystick is moved off
center.

1

Advertising