JLG SSV10 Operator Manual User Manual
Page 44
SECTION 3 - MACHINE OPERATION
3-16
– JLG Lift –
3121186
13
6
Traction Module
Over Temperature
(DRIVE Disabled)
Allow Drive System
Traction Module to Cool
Before Operating
17
7
Ground Control Module
Over Temperature
(Machine Stopped)
Allow Ground Control
Module to Cool
Before Operating
32
7
Pump Motor Over Current
(LIFT UP Disabled)
Platform Load
Over Capacity
34
—
Aux. #1 - Platform Gate
Open or No Pressure on the
Platform Footswitch.
Close Platform Gate or
Depress Platform Footswitch
during machine operation.
35
—
Aux. #1 - Platform Foot-
switch depressed during
Machine Power-up.
Do Not Press on Platform
Footswitch during Machine
Power-Up.
NOTE: The fault conditions shown in this table are fault conditions which the Operator may be able to resolve. Should a fault occur and be displayed on the
LCD screen which cannot be corrected at the Operator’s level, the problem must be referred to a mechanic qualified to repair this model of JLG Lift.
A complete table of Fault Codes is listed in the TroubleShooting Section of the Service and Maintenance Manual.
Table 3-3. LCD Display - Operating Fault Conditions (Continued)
FAULT
CODE
PLATFORM
LEDs
FLASHING
LCD SYMBOL SCREEN
LCD TEXT SCREEN
FAULT DESCRIPTION/
MACHINE CONDITION
TO CORRECT PROBLEM
13
13
00000.0
17
17
00000.0
32
32
00000.0
SECTION 3 - MACHINE OPERATION
3-16
– JLG Lift –
3121186
13
6
Traction Module
Over Temperature
(DRIVE Disabled)
Allow Drive System
Traction Module to Cool
Before Operating
17
7
Ground Control Module
Over Temperature
(Machine Stopped)
Allow Ground Control
Module to Cool
Before Operating
32
7
Pump Motor Over Current
(LIFT UP Disabled)
Platform Load
Over Capacity
34
—
Aux. #1 - Platform Gate
Open or No Pressure on the
Platform Footswitch.
Close Platform Gate or
Depress Platform Footswitch
during machine operation.
35
—
Aux. #1 - Platform Foot-
switch depressed during
Machine Power-up.
Do Not Press on Platform
Footswitch during Machine
Power-Up.
NOTE: The fault conditions shown in this table are fault conditions which the Operator may be able to resolve. Should a fault occur and be displayed on the
LCD screen which cannot be corrected at the Operator’s level, the problem must be referred to a mechanic qualified to repair this model of JLG Lift.
A complete table of Fault Codes is listed in the TroubleShooting Section of the Service and Maintenance Manual.
Table 3-3. LCD Display - Operating Fault Conditions (Continued)
FAULT
CODE
PLATFORM
LEDs
FLASHING
LCD SYMBOL SCREEN
LCD TEXT SCREEN
FAULT DESCRIPTION/
MACHINE CONDITION
TO CORRECT PROBLEM
13
13
00000.0
17
17
00000.0
32
32
00000.0