2N Analogue UMTS gateway 2N SmartGate UMTS - Manual, 1699 v1.1.0 - Manual (Page 64)

Data connection using USB 4.3
64
6. Confirm the saving of your profile (OK). You will be connected to internet
automatically.
SMS sending and receiving
Program AirCard Watcher supports sending and receiving SMS – select menu SMS
Express. Simple SMS application is activated.
Connection to internet – Simcom module version
USB driver installation
For communication over USB port of EasyGate is necessary to install USB driver. The
installation is usually automatic after connection to USB port by delivered USB cable.
The connection is described in detail in part 3.1 - “Installation and setting of EasyGate
PCManager”.
Internet connection
You can use the provider’s installation wizard in case it supports the module used in
gateway (Cinterion MC55i-w for GSM version, Simcom SIM5320E (A, J) for UMTS
version). When this wizard is not available, you have to use manual setting according
following instructions.
Module driver installation
For communication using module is necessary to install modem driver from CD-ROM
Easy Gate.
Driver for MC55i-w on CD is named: ‘mdm2n_vx.x.inf,x’ (x – driver version).
Drivers for SIM5320 are available for 32 and 64 bits Windows systems, they are
placed in appropriate directories.
APN setting
For internet connection is necessary to set the APN of your mobile provider. It could
be set in gateway using PCManager (GSM&SIM - GPRS APN) or in modem extra
settings in PC:
Example: at+cgdcont=1,"IP","internet.t-mobile.cz"
APN