2N Analogue UMTS gateway 2N SmartGate UMTS - Manual, 1699 v1.1.0 - Manual (Page 66)

SIM Card PIN protection 4.4
66
4.4 SIM Card PIN protection
If a SIM card is PIN-protected and the PIN is not programmed in SmartGate UMTS,
UMTS/GSM LED indicates the state and the PIN tone is transmitted on telephone
line.
PIN Entering by PCManager
Like other parameters, the PIN code can be entered using a PC programming tool.
The PIN will be entered automatically upon every 2N® SmartGate UMTS power up.
PIN Entering via Telephone Line
PIN entering via a telephone line connected to FXS interface:
1. Hook off the phone, you can hear the PIN tone.
2. Enter the PIN using the DTMF. You can cancel the wrong PIN by entering
of a , or you can hang up before sending a .
3. To confirm enter a .
4. If you hear the busy tone in a while (a few seconds), you have entered
the PIN correctly. Hang up and wait for registering to the UMTS/GSM
network.
5. If you hear the PIN tone again in a while, you have entered a wrong PIN.
Re-enter the PIN correctly.
6. If you hear the PUK tone in a while, you have entered a wrong PIN and
the SIM card is blocked. Use the mobile phone to unblock the SIM card.
PIN entering via a telephone line connected to FXO interface if 2N® SmartGate
UMTS is used as gateway for extension line of PBX:
1. Dial the SmartGate UMTS’s extension number on your PBX. 2N®
SmartGate UMTS detects ringing and after off hook generates the PIN
tone.
2. Enter the PIN using the DTMF. You can cancel the wrong PIN by entering
of a , or you can hang up before sending a .
3. To confirm enter a .
4. If 2N® SmartGate UMTS after a while (a few seconds) hangs up, you
have entered the PIN correctly.
5. If you hear the PIN tone again in a while, you have entered a wrong PIN.
Re-enter the PIN correctly.
6. If you hear the PUK tone in a while, you have entered a wrong PIN and
the SIM card is blocked. Use the mobile phone to unblock the SIM card.
A correctly entered PIN is stored in SmartGate UMTS’s memory as if you had
programmed it using the PCManager. The PIN will be entered automatically upon
every 2N® SmartGate UMTS power up.