2N OfficeRoute - User manual, 1493 v1.9.0 User Manual
Page 100
100
Caution
To be applied
settings, the name of the user
Parse contents
must be sent at the beginning inside hash characters: #
#
.
user_name text_of_the_message
User must have SMS rights (Users menu). Otherwise, message
will be proceeded to the user according the related GSM module.
Message response – Enable response deliveries.
VIP numbers – Enable deliveries according to the list of VIP numbers.
Save outgoing messages to Sent folder – Enable the saving of sent
messages.
Module n – Allow SMS receiving – Deliver to user – Enable receiving of SMS
for the selected module. Also, select the basic user to receive the SMS received
by one of the modules.
For outgoing SMS use – Choose the GSM module for sending SMS.
Keep message order –
Send the SMS messages in the same order as they
came from the SMTP server or web inteface to
.
2N OfficeRoute
®
Answer arrives until – Set the time for answer to sent SMS messages. Within
this time the incoming SMS from the same telephone number as that in the sent
SMS will be routed to the user who created the SMS. After this time the SMS will
be routed to the user who is defined as the default user for GSM module n.
Email domain name – The domain name must be equal to the POP3 domain
name. The domain name is used for the SMS sender and SMS receiver for
example
-
and
SMS_sender_tel.number@domain
name
SMS_receiver_tel.number@ domain name
Delete SMS with POP3 – An already read message could be deleted from the
POP3 server. You can delete the message or mark it as already read (i.e. still
available in the Inbox directory through the web-based interface, but the POP3
server cannot see it).
POP3 email subject – Subject of the message to be filled in according to the
settings.You can use formatting strings in the text as well
2N OfficeRoute
®
%n – sender number
%u – receiver number
%d – date
Maximum number of SMS per email – The SMTP server makes one or more
SMS messages from incoming e-mail (the maximum count of created SMS
messages is set in the web-based interface. It is possible to set from 0 to 100
messages).
SMTP IP access control – Define the IP addresses or ranges that are allowed
to send SMS by e-mail.
SMTP authentication required – Authentication goes through the username
and password, which are used for registering to the web-based interface of 2N
®
. Every SMS will be changed to e-mail in the Inbox directory after
OfficeRoute
successful authentication.
Allow 16-bit SMS – The server supports only 7-bit messages encoded according
to ISO-8859-1 or 16 bit Unicode UTF-8 (messages with a different encoding could
be illegible if received as SMS messages).