2N OfficeRoute - User manual, 1493 v1.9.0 - Manual (Page 31)

31
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Figure 3.7: Configuration Wizard – Passwords for Extensions
7. Outgoing Calls through VoIP Provider
To use for outgoing calls through a VoIP provider (it is necessary 2N OfficeRoute –
®
to have an allocated user account), enter the requested information as follows:
– domain or IP address of the provider's SIP server; SIP server address
– allocated phone number or account name; SIP name
– name for authentication (it can be the same as the SIP name); User name
– assigned password. Password
It is also necessary to specify the prefix for the call to be routed through the VoIP
provider.
Caution
'0' is added automatically before the prefix entered to make the
Least Cost Router (LCR) work properly.
Note
Even if you fail to fill in the SIP line parameters, the line will be
added to configuration for later use.