2N OfficeRoute - User manual, 1493 v1.9.0 - Manual (Page 86)

86
2N TELEKOMUNIKACE a.s., www.2n.cz
®
3.7 Administration
Main Configuration
Here set the main parameters for using the device (e.g. PIN for SIM cards, DSP codecs
– G.729 or G.723, Mobility Extension enable).
Figure 3.73: Main Configuration – Administration
Confirm remove – Warning message before deleting settings.
SIM card routing – Enable the SIM card as a routing object.
Enable SIP session progress – SIP session process signalling.
Advanced config of regular expressions – Regular expressions provide a
concise and flexible means for identifying strings of text of interest. This
checkbox is for special cases.
DSP codec – Type of codec used by the digital signal processor.
Default language – Default language for administration.
Max user session time – Time in seconds for automatic logout from the
administration after inactivity.
Simple login page – Check off this option to enable a simple login page.
SIP proxy port – define port which is used for communication between 2N
®
proxy and SIP terminals. The default port is 5060. OfficeRoute
Caution
Having changed the default SIP Proxy port, change the internal
line port to be entered behind the IP address, separated with a
colon (refer to ) Subs. 3.6 - SIP lines to avoid a 2N
®
call set-up error. OfficeRoute
Set Time Zone
Here set the time zone for . 2N OfficeRoute/2N VoiceBlue Enterprise
® ®