2N OfficeRoute - User manual, 1493 v1.9.0 - Manual (Page 25)

25
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Telnet Console Access
This is a short description of new features added to the serial console configuration. For
the standard serial console configuration capabilities refer to the section 2.11.
There is also a possibility of using Telnet for configuration in 2N OfficeRoute
®
addition to the standard serial console configuration.
Connect to your via the Telnet type 2N OfficeRoute
®
telnet <your OfficeRoute IP
in the command line. address>
If successful, will require authentication from you. To log in, use the 2N OfficeRoute
®
valid login and password of one of the users in the Administrators 2N OfficeRoute
®
group. No user other than a member of the Administrator group may log in. If the login
and password are entered correctly, you will be logged in.
Now you will see a window similar to the standard serial console configuration window
and you can work with it in the same way. To log out, get to the main menu and
choose the
option (this option is not visible in the serial console window). Logout
There are all menus available as for the USB access.
Note
The Telnet function may not be enabled by default in some
newer Microsoft Windows OS. For a Telnet console access enable
the Telnet client.