2N OfficeRoute - User manual, 1493 v1.9.0 User Manual
Page 42
42
System – Choose your DDNS provider from the list of supported DDNS
providers.
Username – Enter your username in accordance with your DDNS account.
Password – Enter your password in accordance with your DDNS account.
Update period – Period of IP address updating at the DDNS server.
HTTP proxy – Enter the IP address of your HTTP proxy. If you have no HTTP
proxy, leave the field blank.
SNMP
The Simple Network Management Protocol (SNMP) daemon is a background server
process that can be run on any Transmission Control Protocol/Internet Protocol
(TCP/IP) workstation host. It helps you monitor the state of the device on the network.
is capable of receiving and responding to requests sent by SNMP
2N OfficeRoute
®
versions v1 and v2c. SNMP traps-messages on events to be notified-are sent by SNMP
v2c by default.
Figure 3.21: SNMP Configuration
IP address for SNMP traps – The IP address to which traps are sent. Port 162
is used for communication by default. If necessary, set another port behind the
IP address colon (192.168.1.2:163, e.g.).
Community – The group to which the devices and management stations running
via SNMP belong. Helps you can define where information shall be sent. The
default SNMP communities are:
Write – private
Read – public
Traps enabled – Enable traps for Calls, LCR and GSM.
Data Connection
In this menu you can see the list of inserted SIM cards and start/stop data connection
by clicking on
.
Connect/Disconnect