2N OfficeRoute - User manual, 1493 v1.9.0 - Manual (Page 32)

32
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Figure 3.8: Configuration Wizard – SIP Provider
8. Outgoing Calls through GSM/UMTS
When making outgoing calls outside the office always start by dialling zero. If you have
set the VoIP provider in the previous step, calls to numbers with no prefix will be
routed through VoIP; all the other calls will be routed through the first vacant
UMTS/GSM module.
Figure 3.9: Configuration Wizard – Outgoing Calls through GSM/UMTS
9. Incoming Calls
Select where incoming calls should be routed. If you select To DISA line, a welcome
note will be played and the caller can choose an extension number. If you select To
extension, incoming calls will be directed to the extension you have selected.