Services – 2N OfficeRoute - User manual, 1493 v1.9.0 User Manual
Page 69
69
memory.
Look up both lists (call & sms) – Enable the Auto CallBack function after a call
or after SMS sending.
Disable GSM alerting detection – if ticked off, the gateway does not detect
alerting and sends the session progress tone immediately.
Network Selection
Use this menu to select one of five network selection rules for the UMTS module.
Automatic is selected by default. Use the
icon in the right-hand bottom corner to
change the settings. Click on
to save the changes, on
to reset the changes, or
on
to return.
Caution
Make sure that your mobile provider supports login using your
selected technology before selecting a network for the UMTS
module manually.
The device will be restarted upon configuration saving.
Figure 3.50: GSM – Network Selection
Services
Services that enable/disable ME by sending SMS. The SMS has to be sent from the ME
user number filled in in the user settings.
To enable the ME function, just send the following SMS to gateway: *<Service code>
To disable the ME function, send: #<Service code>
The gateway responds with a confirmation SMS.
Figure 3.51: Services