2N OfficeRoute - User manual, 1493 v1.9.0 - Manual (Page 22)

22
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2.8 Console Access
You need a direct interconnection of your 2N OfficeRoute/2N VoiceBlue
® ®
gateway and PC especially when you do not know the gateway IP address Enterprise
and thus cannot configure it using a web browser. Also you can configure the DHCP
server in the gateway or the VRRP function.
The console system is arranged as a set of nested menus. Entering a menu item
number you either get into a submenu, or have the required operation executed, or set
the selected parameter.
Serial Console Access
When the gateway is powered on, the main menu should get displayed after terminal
connection (see
). To display the main console menu push . chapter 2.4 Enter
Figure 2.10: Serial Console Access – Main Menu
Every menu consists of the following parts:
Header – Contains (from the left): product name, firmware version, menu name
and network name assigned to the equipment.
Options – Numbers and names of available options.
Value – If [menu] is displayed, the item includes a submenu. Otherwise it shows
the current value of the option.
Description – Explains briefly the meaning of every option in the menu.
Enter an option number…> – Here enter the option number.
To select an option from a menu, enter its first number and push for Enter
confirmation.
Submenus
If you select a submenu, this submenu gets displayed. Now you can select items from
the selected submenu or push
for return. Esc
Commands and Values
If you are requested to enter some information after selecting an item, you should
enter one of the following values:
Key word – List of one or more fixed strings. To select one, enter only so many
initial characters as can distinguish it unambiguously from other key words.
Enter one of [ansi,color,teletype] : a
In the above mentioned case, select the key word by entering just an 'a', 'c', or 't' and