2N OfficeRoute - User manual, 1493 v1.9.0 User Manual
Page 29
29
Figure 3.4: Configuration Wizard – PIN Codes
4. Data Connection
In this step you can set the data connection through the UMTS SIM card. Enter the
APN, username and password for data connection if prompted by the network (you will
find this information in the SIM card package, or call the provider's information line). If
you cross the 'Automatic connection activation' checkbox, the Internet connection will
always be active, even after a restart or temporary loss of power.
Caution
The SIM card intended for UMTS data connection must be in the
SIM1 position. If, in the future, you insert a different SIM card,
it is always necessary to restart the equipment. Insert the cards
for GSM voice calls in the remaining positions.
Figure 3.5: Configuration Wizard – Data Connection